
|
| Articles Images for use in news articles. By Admin created 04.03.01 (2 images) | |
| PV 320-Steel Tank Top Project: PV 320 coating over a steel tank top for protection against constant phosphoric acid drip Owner: S.F. Phosphates Ltd, Rock Springs, WY Specified: PolyVers Contractor: Systems Development Services Inc, Kansas City, MO System: PolyVers PV 320 fast set spray polyurea elastomer spray coating system for metal surfaces. Area: 5000 s.f. of elevated tank top Installation: September 1995 Notes: Because of weather conditions and plant shut down limitations, the coating had to be installed and cured in less than 12 hours. 70 mils of the PV 320 was installed on the 5000 s.f. tank top in less than 8 hours. By Admin created 04.01.22 (4 images) | |
| PV 350-Restroom Floor Project: Application of PolyVers PV 350 to restroom floor areas at a trona mine located west of Green River, WY By Admin created 04.01.22 (4 images) | |
| PV 350-Secondary Containment-Raytheon Project: Installation of PolyVers PV 350 fast set spray on a concrete tank farm basin for secondary containment Owner: Reytheon, Wichita, KS Specified: Rick Bynorth of Piping Systems Inc of Kansas City, MO Contractor: Systems Development Services Inc of Kansas City, MO System: PolyVers PV 350 fast set polyurea elastomer spray coating system for concrete surfaces Area: Approximately 5000 s.f. Installation: October 1996 Notes: The polyurea coating was applied at a film thickness of 65 mils. The application was completed over a two day weekend. By Admin created 04.01.22 (4 images) | |
| PV 350-Concrete Chimney Project: Application of PolyVers polyurea spray coating to a 230 vertical foot concrete chimney located 60 miles west of Salt Lake City, UT in the small town of Rowley Owner: Magnesium Corporation of America Specified: Harry Lane, Senior Project Engineer at Magnesium Corporation General Contractor: Pullman Power Inc, of Salt Lake City, UT Sub-Contractor: System Development Services Inc of Kansas City, MO applied the fast set polyurea spray coating at an average film thickness of 65 mils System: PolyVers PV 350 fast set spray polyurea elastomer spray coating for concrete surfaces Area: Total project size was 30,000 s.f. Installation: September 1997 By Admin created 04.01.21 (8 images) | |
| Parking Deck-Elevated Concrete Project: Sutton Park Condominiums parking structure coating project in Rochester, NY Owner: Home Owners of Sutton Park Management Group: The Cabot Group Specified: Rick Donoghue, Service Manager for the Cabot Group and Sutton Park Home Owners Contractors: VariScience Inc of Rochester, NY was responsible for all surface preparation and remedial repairs. Systems Development Services Inc of Kansas City, MO installed the PolyVers Parking Deck Coating System System: PolyVers Parking Deck Coating System fast set polyurea elastomer spray coating system for concrete surfaces Area: Approximately 21,000 s.f. of elevated concrete parking deck Installation: January 1997 Notes: Temperature during installation averaged 19 degrees F (-7 C). No tenting and heating of any area was required for installation of the Parking Deck Coating System. The installation was completed in approximately 6 days. By Admin created 04.01.21 (8 images) | |
| Parking Deck-Exterior Elevated Concrete Project: Exterior Deck, crack & joint repair and coating project in Kansas City, MO Owner: Trigen Energy Corporation Specified: Piping Systems Inc Contractor: Systems Development Services Inc of Kansas City, MO System: PolyVers Parking Deck Coating System fast set polyurea spray coating system for concrete surfaces Area: 5,000 s.f. of elevated concrete deck. The deck area has offices and locker rooms below it. Installation: October 1996 Notes: 65 mils of the Parking Deck Coating System polyurea system was applied over a two day weekend. Limited shut down of the deck was of major concern to the owners, mainly due to ingress/egress limitations. By Admin created 04.01.21 (8 images) | |
| PV 320-Steel Chlorine Gas Pipes Project: Sealing corrosion holes in a 220 l.f. 04 anode oval header pipe, while in operation. The project was located 60 miles north of Salt Lake City, UT, in the small town of Rowley Owner: Magnesium Corporation of America Specified: Harry Lane, Senior Project Engineer for Magnesium Corporation Contractor: Systems Development Services Inc of Kansas City, MO System: PolyVers PV 320 fast set polyurea spray coating for metal surfaces Area: Approximately 2000 s.f. Installation: May 1996 Notes: This coating was applied directly to the pipe surface while the pipe was still in operation. Chlorine gas was flowing through the pipe at a negative pressure of 5 lbs. Neoprene patches were used to plug the holes and the polyurea spray coating was applied over the neoprene, coating the entire pipe. By Admin created 04.01.21 (8 images) | |
| PV 350-Secondary Containment-HCL Pit Project: Coating a concrete secondary containment pit to protect it against a 38% hydrochloric acid spill Owner: General Chemical Corporation, Green River WY Specified: PolyVers Contractor: Precision Sealing Inc System: PolyVers PV 350 fast set polyurea spray coating Area: Approximately 5000 s.f. Installation: July 1995 Notes: PV 350 was installed at a film thickness of 85 mils. The entire bottom of the containment area was hydroblasted and leveled out with a rapid set cementious material prior to the application of the polyurea coating. By Admin created 04.01.21 (8 images) | |
| PV 350-Locker Room Floor Project: Application of PolyVers polyurea spray coating to locker floor areas at a trona mine located west of Green River, WY Owner: General Chemical Corporation Specified: Calvin Southwick, Project Engineer at General Chemical Corporation General Contractor: Dynamic Services Inc of Mt. View, WY provided all of the surface preparation, coating removal and masking Sub-Contractor: Systems Development Services Inc of Kansas City, MO,installed the polyurea spray coating. The colors used were beige and charcoal grey. The coating was applied at a thickness of 65-75 mils System: PolyVers PV 350 fast set polyurea elastomer spray coating for concrete surfaces Area: Total project size was 5000s.f. Installation: October 1997 By Admin created 04.01.21 (7 images) | |
| Parking Deck-Multi-Level Concrete Project: Poured in place concrete parking deck coating project located in Indianapolis, IN Owner: Lacy Diversified Industries, Ltd Specified: Ron Holmes of F.E. Gates & Company Contractor: F.E. Gates & Company System: PolyVers Parking Deck Coating System fast set polyurea spray coating system for concrete surfaces Area: 42,000 s.f. Installation: November 1997 Notes: Excluding time for preparation and masking, installation of the Parking Deck Coating System took just 4 days. The temperature ranged from 30 to 45 degrees F (-1 to 7 C)during installation, and no tenting or heating was required. The system was applied at a thickness of 60-75 mils. F.E. Gates & Company, a certified installer of the PolyVers Parking Deck Coating System was responsible for all surface preparation and installation of the Parking Deck Coating System By Admin created 04.01.21 (8 images) | |
| PV 350-Waterproof Mud Mats Project: Below grade, mud slab waterproofed using PV 350 at a film thickness of 60 mils Owner: Massachusetts Bay Transit Authority, Boston, MA Specified: Supervising Engineer, Bechtel Corporation Contractors: General Contractor is Kewit Inc, PV 350 installed by P.J. Spillane Company Inc, Boston, MA System:PolyVers PV 350 fast set polyurea spray coating Area: Approximately 40,000 s.f. Installation: October 1995 to June 1996 Notes: PV 350 was installed at temperatures well below freezing. By Admin created 04.01.21 (8 images) | |
| PV 350-Neoprene Lined Steel Cone Project: PV 350 polyurea coating over neoprene lined steel cones for additional abrasion protection. Applications were made at a phosphate mine located south of Rock Springs, WY Owner: S.F. Phosphates Ltd, Rock Springs, WY Specified: Larry Majdic, Maintenance Supervisor at S.F. Phosphates Contractor: System Development Services Inc, Kansas City, MO System: PolyVers PV 350 fast set spray coating Area: Multiple neoprene lined steel cones Installation: July 1995 By Admin created 04.01.21 (4 images) | |
| PV 350 Pulp & Paper-Repair Trainshed Rail System and Coat Floor Project: Repair Trainshed Rail System and Coat Floor to Prevent Water Damage from Occupied Spaces Below Owner: Bowater, Thunder Bay, ontario System: PolyVers PV 350 Area: 3,840 s.f. Installation: December 1999 Notes: For years the trainshed had caused water damage to a locker room and other spaces below. Bowater decided to remedy the problem. During an extremely tight shutdown, the ties and rails were reset and the whole shed floor was overcoated. By Admin created 04.01.21 (3 images) | |
| PV 350 Pulp & Paper-Repair Tank Base and Outer Launder Ring Wall Bearing Surface Project: Repair Tank Base and Outer Launder Ring Wall Bearing Surface Owner: Norampac, Red Rock, ontario System: PolyVers PV 350 Area: 3,500 s.f. Installation: June 1998 Notes: Clarifier rake arm drive surface required repair. Many iterations of epoxy surfaces had failed. While tank was empty, the Owner asked for repairs to the base of the tank. By Admin created 04.01.21 (4 images) | |
| PV 350 Pulp & Paper-Rehabilitation and Spray Coat Old Tile Chest Project: Rehabilitation and spray coat old tile chest Owner: Weyerhauser Mill, Dryden, ontario System: PolyVers PV 350 Area: 3,500 s.f. Installation: June 1998 Notes: Cost of replacement for this worn-out tank would have been over ten times greater than this rehabilitation work. The Owner realized the savings in both time and equipment replacement. The interior repairs will never have to be repeated during the remaining useful life of the tank. By Admin created 04.01.21 (4 images) | |
| PV 350 Pulp & Paper-Chemical Containment Tanks Project: Spray Coat New Buckman Chemical Containment Tanks Owner: Weyerhauser Mill, Dryden, ontario System: PolyVers PV 350 Area: 4,000 s.f. Notes: This was the first of many applications at the Dryden facility. Weyehauser continued the innovative use of polyurea after it bought the facility from Avenor Paper. By Admin created 04.01.21 (3 images) | |
| PV SL/45-Random Cracks, Control Joint & Spall Repair Project: Repair of damaged control joints and major random cracks at this well known southern Mini Mart service station chain based in Atlanta, GA Owner: Requested not to be mentioned Specified: PolyVers Incorporated Contractor: Service Maintenance & Supply Inc, Fredericksburg, VA System: PolyVers PV SL/45 and PW-1 primer Area: 15,000 l.f. of damaged control joints and cracks Installation: April 1996 Notes: SL/45 and primer were specified. All work was completed between the hours of 10:30 pm and 5:00 am in order to eliminate as much customer inconvenience as possible. This well known chain operates 24/7. once installed, the PV SL/45 was opened to traffic within one hour. By Admin created 04.01.21 (8 images) | |
| PV 350-Interior Pool Deck Coating Project: Interior pool deck coating installed for the Denver Parks and Recreation Department. The project was for the Glen Arms recreation center, located in Denver, CO Owner: City of Denver Specified: Parks and Recreation Department Maintenance Division Contractors: Elite Waterproofing Inc of Denver provided all of the surface preparation. Systems Development Services Inc of Kansas City, MO, applied the polyurea coating to the pool deck perimeter System: PolyVers PV 350 fast set polyurea elastomer spray coating for concrete surfaces. By Admin created 04.01.21 (7 images) | |
| PV SL/75-Cold Storage Control Joints Project: A newly constructed 4000,000 s.f. cold storage facility with approximately 41,000 lineal feet of control joints Owner: C & S Wholesale Grocers, Westfield, MA Specified: General Contractor Contractor: S & S Concrete Inc of Boston, MA System: PolyVers PV SL/75 self leveling rapid curing polyurea sealant Area: Approximately 41,000 l.f. Installation: February 1996 Notes: Constant temperature during installation was 15 degrees below zero F (-26 C) By Admin created 04.01.09 (4 images) | |
| PV 350-Water Filtration Basin Project: Application of PolyVers polyurea spray coating to eight large concrete water filtration basins. Owner: Internationally known chemical manufacturer located in Richmond, VA Specified: Protect Inc, a specialty coating and waterproofing contractor in Richmond, VA. Protect Inc was also the acting General Contractor Sub-Contractor: Systems Development Services Inc from Kansas City, MO applied the polyurea coating at a film thickness of 80-85 mils System: PolyVers PV 350 fast set polyurea elastomer spray coating for concrete surfaces Area: Total project size was 43,000 s.f. Installation: October 1996 to May 1997 By Admin created 04.01.09 (8 images) | |
| PV 350-Secondary containment - sulfuric acid Project: Concrete resurfacing and coating of this secondary containment pit, located west of Green River, WY Owner: General Chemical Corporation, Green River, WY Specified: PolyVers Contractor: Precision Sealing Inc, Tulsa, OK System: PolyVers PV 350 fast set spray for concrete surfaces, rapid set non shrink grout and Novolac epoxy Area: 1800 s.f. Installation: September 1995 Notes: The concrete pit was hydroblasted and resurfaced using rapid set cementious material. Once the concrete floor and tank support beams had been resurfaced, 85 mils of PolyVers PV 350 fast set polyurea spray coating was applied. Immediately after the polyurea application, 30 mils of Novolac epoxy was applied. By Admin created 04.01.09 (7 images) |